AUTOMATIC OPERATING UNITS FOR INDUSTRIAL SECTIONAL DOORS

Ready out of the box – reliability and satisfaction

GfA Elektromaten automatic operating units are special-purpose products that can be used in all conditions. From typical, such as warehouses and factory buildings, to more heavy duty requirements with higher humidity, such as car washes, and rooms with alkaline air, such as cowsheds and piggeries.
Thanks to state-of-the-art technologies and an automated production line, GfA Elektromaten sets a new standard on the market. As a leading manufacturer, it meets the demands of customers around the globe.

ELEKTROMATEN SE actuators

SE series drive units are special actuators intended for automating balanced sectional industrial doors. The actuator is fitted directly onto the door shaft.

Actuator construction:

compact design,
three-phase electric motor,
gearbox integrated with the motor body,
DES electronic limit switches,
emergency opening device,
emergency opening chain,
integrated frequency inverter – available with the FU actuator

GfA ELEKTROMATEN central control units

TS series controllers are devices designed and manufactured to meet the stringiest requirements of the end customer. Central control units are compatible with drive units powered from a single-phase and three-phase network. Quick installation, simple connection, and intuitive programming paired with failure-free operation all translate into a reliable door automatic operating unit.

Technical specification and central control unit features:

control unit housing made of heavy duty materials,
high ingress protection rating of IP54 or IP65,
power supply 1 x 230 [V] or 3 x 400 [V], depending on the selected actuator,
actuators are compatible with the DES and NES limit switches,
integrated control buttons OPEN-STOP-CLOSE,
integrated display,
direction of rotation selectable with a keypad,
independent programmable inputs,
infinitely adjustable speed with the FU series actuators,
available operating modes: Totmann or Automatik,
infinitely adjustable parameters,
compatible with safety edges,
compatible with control devices such as: wall button, radio receiver, code keypad,
compatible with safety devices such as: photocells, light safety light curtain, STOP button,
compatible with signal lights in red/green for traffic control (option available with the TS981 central control unit),
can be connected with the SAP system, smoke extraction system, and ventilation system (option available with the TS981 central control unit),
operation cycle counter,
service cycle counter,
and many more.

SOMMER automatic operating units

Base+ and tiga+ are drive units for balanced sectional industrial doors intended for indoor car parks. The kit includes a carriage with a motor and a track. The track is fitted with a permanent tension chain along which the carriage travels. Depending on the drive unit type, the control unit can be fitted to a wall (tiga+) or at the end of the track (base+). With this solution, the drive unit does not require any additional side clearance.

Drive unit characteristics:

compact design;
very smooth operation;
soft START – STOP;
24 [V] motor integrated with the carriage;
overcurrent obstacle detection – an overload protection system stops and reverses the door leaf when the bottom edge contacts an obstacle;
built-in LED warning light,
photocells – ensure optimum safety whenever an obstacle appears between the photocells;
auto selection of operating parameters;
central control unit with an integrated Sommer radio receiver;
power supply: 1 x 230 [V];
emergency uncoupling in case of power outage;
signal lights in red/green for traffic control*,
intended for indoor car parks with up to 30 parking spaces,
can be connected with the SAP, smoke extraction, and ventilation systems*.

* – Forced function. This feature is only available with the tiga+ drive unit.

The base+ and tiga+ drive units will complete the automatic operating unit selection for the Makro Pro 2.0 and Makro Pro ALU 2.0 doors (LH and LHp tracks).

Automatic operating units fitted in WIŚNIOWSKI industrial gates are configured for continuous reliable operation. We use the proven GfA drive and control units that ensure the highest comfort of use and many years of operation.

KIT TYPE	Totmann	Automatik	Automatik	Automatik S	Automatik FU	Totmann	Automatik	Automatik BFT	Automatik SOMMER	Automatik SOMMER
CONTROL	TS-959	TS-970	TS-971	TS-981	TS-970	integrated	T-720	integrated, VENERE A	base+	tiga+
MAIN POWER SUPPLY	3x400V	3x400V	3x400V	3x400V	1x230 or 3x400V	1x230 V	1x230 V	1x230 V	1x230 V	1x230 V
LIMIT SWITCH	Electronic – operator level	Electronic – operator level	Electronic – operator level	Electronic – operator level	Electronic – operator level	Mechanical – drive level	Mechanical – drive level	Electronic – drive level	Electronic and mechanical restrictor	Electronic and mechanical restrictor
EMERGENCY OPENING	Chain hoist	Chain hoist	Chain hoist	Chain hoist	Chain hoist	Chain hoist	Chain hoist	Manual	Manual	Manual
ACCESSORIES	- Central control unit: up (with impulse maintenance), stop, down (without impulse maintenance) - Can be connected to a signal light	- Central control unit: up (with impulse maintenance), stop, down (with impulse maintenance) - Safety edge sensors - Auto door closing feature after preset time	- Central control unit: up (with impulse maintenance), stop, down (with impulse maintenance) - Safety edge sensors - Safety edge wireless transmission system - Auto door closing feature after preset time	- Central control unit: up (with impulse maintenance), stop, down (with impulse maintenance) - Safety edge sensors - Compatible with traffic control with signal lights - Supports connection of the signal from the smoke extraction and ventilation systems - Auto door closing feature after preset time	- Motor with an integrated frequency inverter ensuring infinite speed adjustment - Central control unit: up (with impulse maintenance), stop, down (with impulse maintenance) - Safety edge sensors - Auto door closing feature after preset time	- Three-function switch: up (with impulse maintenance), stop, down (without impulse maintenance)	- Central control unit: up (with impulse maintenance), stop, down (with impulse maintenance) - Safety edge sensors	- Built-in central control unit with an integrated BFT radio receiver - Control pendant with buttons: up (with impulse maintenance), stop, down (with impulse maintenance) - Overcurrent obstacle detection	- Central control unit integrated with the track with a built-in SOMMER radio receiver - Operating mode: up (with impulse maintenance), stop, down (with impulse maintenance) - Overcurrent obstacle detection	- Central control unit with an integrated SOMMER radio receiver - Forced operating mode – traffic control feature with signal lights - Supports connection of the signal from the smoke extraction and ventilation systems - Overcurrent obstacle detection
EXPANDABILITY	Auxiliary control and signalling devices	Auxiliary safety, control, and signalling devices	Auxiliary safety, control, and signalling devices	Auxiliary safety, control, and signalling devices	Auxiliary safety, control, and signalling devices	None	Auxiliary safety, control, and signalling devices	Auxiliary safety, control, and signalling devices	Auxiliary safety, control, and signalling devices	Auxiliary safety, control, and signalling devices
CONSTRUCTION	Self-locking gear with aluminium housing	Self-locking gear with aluminium housing	Self-locking gear with aluminium housing	Self-locking gear with aluminium housing	Self-locking gear with aluminium housing	Self-locking gear with PVC housing	Self-locking gear with aluminium housing	Worm gear with aluminium housing	Track, carriage, and control unit	Track, carriage, and control unit